Hydrogen fuel cell power generator Automatic oxyhydrogen welding
machine copper tube brazing
Why do we use oxyhydrogen generator?
Gas cylinders can be extremely dangerous and gas oxyhydrogen
generator is quite safe since
it does not require gas cylinders and no risk of leakage and
explosion.
Oxyhydrogen welding machine Principle
Water = Fuel!
It doesn’t need gas cylinder, it only needs little water +
electricity!
1CBM HHO gas = 3 KWH electricity + 0.58 L water Straight laser
flame, 2800 ℃ Non harmful gas!
Don’t need to store gas!
It improves sealing efficiency about 70%.
Oxyhydrogen generator consumes water and electricity and
electrolyzes water in hydrogen gas and oxygen
gas , We can use H2 and O2 as source of flame replacing
LPG,Propane,Acetylene fule or natural gas or other
fuel
Comparison among oxy-hydrogen gas,acetylene and propane
Advantage of Oxy-hydrogen gas flame
- High temperature:2800 ℃.
- High caloric value:34000kcal/kg.
- Laser flame,fast heating speed.
- Non-pollution:Only use water and electric.
- Non-toxic: No smoke .
- Non-explosion:Low pressure,zero storage.
- Energy saving:save 40%-60% fuel.
- Wide application:Anywhere that need flame.
- Comparison among oxy-hydrogen gas,acetylene and propane.
Item | Acetylene | Propane | Oxy-hydrogen gas |
Chemical Formula | C2H2 | C3H8 | 2H2+O2 |
Burn Equation | 2C2H2+5O2=4CO2+2H2O | C3H8+5O2=3CO2+4H2O | 2H2+O2=2H2O |
Calorific Value(KJ/NM3) | 52800 | 93100 | 12600 |
Fuel Cost(RMB/KG) | 20 | 8 | |
Fuel Cost(RMB/M3) | 20*1.16=23.2 | 8*1.964=15.7 | 1*3=3 |
O2:Fuel Gas | 2.5 | 5 | Needn’t |
O2 Price(RMB/M3) | 3.6 | | |
1NM3 Fuel Gas+O2 cost | 23.2+2.5*3.6=32.2 | 15.7+5*3.6=33.7 | 1*3=3 |
Calorific Vlaue(RMB/MJ) | 32.2/52.8=0.548 | 33.7/93.1=0.362 | 3/12.6=0.236 |
Energy Save(%) | (0.548-0.236)/0.548=57% | (0.362-0.236)/0.362=35% | |
HHO welding solution for Electric Motors
High quality and safety,efficiency and innovation.
Advantages
- Quickly remove every insulation from wires no need of mechanical
systems.
- Make copper connections up to 2.500 mm2 so quickly that the
material doesn’t overheat.
- Remove bearing,rings and pulleys.
- Clean stator and rotor slots perfectly in a few seconds.
Other applications
Diamond Segment Welding , Ampoule filling welding , Platinum
Resistor Welding ,
Electronic Components welding , Steel Cutting , Acrylic Polishing ,
nstrument Welding , Wax investment Casting , Enameled Wire Welding
,
thermocouple Welding , QuartzGlass Tube Sealing , Jewelry Welding
